Register to receive 50% off of the purchase of featured ST MEMS and Gyroscope Evaluation Boards.

ST’s complete family of single-axis (yaw) and two-axis (pitch-and-roll, pitch-and-yaw) MEMS gyroscopes offers the industry’s widest full-scale range, from 30 to 6000°/s.

These innovatively designed sensors can provide two separate outputs for each axis at the same time—an unamplified output value for general detection of angular motion and a 4x amplification for high-resolution measurements that enhances design flexibility and the user experience.

Features:

• Single-axis (Yaw) / multi-axis (Pitch and Roll, Pitch and Yaw) gyroscope sensor family
• Complete range of full scale available (30°/s to 6000°/s)
• Ultra stability over temperature
• Low noise level (0.014°/s/√Hz)
• Amplified and not amplified outputs contemporarily available
• Extended power supply range (2.7 to 3.6V)
• Power-down mode to ensure low current consumption for battery operated devices
• Absolute angular rate output
• Internal low pass filter
• Embedded self test
• High shock survivability

Applications:

• Gaming
• Image stabilization in cameras and camcorders
• Pointing devices for smart user interfaces
• Enhanced GPS solutions (dead reckoning algorithm implementation)
• Motion control in robotics
• Platform stabilization for industrial machinery

ST MEMS Featured Eval Boards

Device	Description
Accelerometers
STEVAL-MKI004V1	MEMS 3-Axis - ±2g/±6g Digital Output Low Voltage Linear Accelerometer Evaluation Board based on LIS3LV02DQ
STEVAL-MKI005V1	MEMS 3-Axis - ±2g/±6g Digital Output Low Voltage Linear Accelerometer Evaluation Board based on LIS3LV02DL
STEVAL-MKI006V1	MEMS 3-Axis - ±2g/±8g Digital Output Low Power Linear Accelerometer Evaluation Board based on LIS302DL
STEVAL-MKI009V1	LIS3LV02DL Adapter Board designed to be plugged into a standard DIL 20 socket
STEVAL-MKI013V1	LIS302DL Adapter Board designed to be plugged into a standard DIL 24 socket
STEVAL-MKI014V1	MEMS 3-Axis ±2g/±6g Analog Output Evaluation Board based on LIS344ALH
STEVAL-MKI015V1	LIS344ALH Adapter Board designed to be plugged into a standard DIL 20 socket
STEVAL-MKI016V1	MEMS 3-Axis ±3.5g Analog Output Evaluation Board based on LIS344AL
STEVAL-MKI017V1	LIS344AL Adapter Board designed to be plugged into a standard DIL 20 socket
STEVAL-MKI018V1	LIS244AL Adapter Board designed to be plugged into a standard DIL 20 socket
STEVAL-MKI019V1	MEMS 3-Axis ±2g Analog Output Evaluation Board based on LIS302SG
STEVAL-MKI020V1	LIS302SG Adapter Board designed to be plugged into a standard DIL 20 socket
STEVAL-MKI021V1	MEMS 3-Axis ±2g Analog Output Evaluation Board based on NANO Accelerometer LIS331AL
STEVAL-MKI022V1	MEMS 3-Axis ±2g /±4g /±8g Smart Digital Output Evaluation Board based on NANO Accelerometer LIS331DLH
STEVAL-MKI024V1	MEMS 3-Axis ±2g /±8g Smart Digital Output Evaluation Board based on NANO Accelerometer LIS331DL
STEVAL-MKI029V1	Inclination analysis demonstration board based on the STM8S207R6 MCU and LIS331DLH MEMS
STEVAL-MKI030V1	Vibration analysis demonstration board based on the STM8S207R6 MCU and LIS331DLH MEMS
STEVAL-MKI032V1	Adapter board for Digital/Analog MEMS attachable to STM32-EVAL
STEVAL-MKI054V1*	LY530ALH Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI060V1*	MEMS Demonstration Board for LIS331AR Digital Accelerometer
STEVAL-MKI062V1*	iNEMO: iNErtial MOtion Evaluation Board based on MEMS and STM32
Gyroscopes
STEVAL-MKI023V1	Single-axis ±300°/s analog output yaw rate gyroscope Evaluation Board based on LISY300AL
STEVAL-MKI033V1*	MEMS Analog Output Demonstration Board for the LPR503AL, +/-30°/s and +/120°/s, Dual Axis Pitch and Roll Gyro
STEVAL-MKI034V1*	MEMS Analog Output Demonstration Board for the LPR510AL, +/-100°/s and +/400°/s, Dual Axis Pitch and Roll Gyro
STEVAL-MKI035V1*	MEMS Analog Output Demonstration Board for the LPR530AL, +/-300°/s and +/1200°/s, Dual Axis Pitch and Roll Gyro
STEVAL-MKI036V1*	MEMS Analog Output Demonstration Board for the LPY503AL, +/-30°/s and +/120°/s, Dual Axis Pitch and Yawl Gyro
STEVAL-MKI037V1*	MEMS Analog Output Demonstration Board for the LPY530AL, +/-300°/s and +/1200°/s, Dual Axis Pitch and Yaw Gyro
STEVAL-MKI038V1*	MEMS Analog Output Demonstration Board for the LPY550AL, +/-500°/s and +/2000°/s, Dual Axis Pitch and Yaw Gyro
STEVAL-MKI039V1*	MEMS Analog Output Demonstration Board for the LY503ALH, +/-30°/s and +/120°/s, Dual Axis Pitch and Roll Gyro
STEVAL-MKI040V1*	MEMS Analog Output Demonstration Board for the LY510ALH, +/-100°/s and +/400°/s, Dual Axis Pitch and Roll Gyro
STEVAL-MKI041V1*	MEMS Analog Output Demonstration Board for the LY550ALH, +/-500°/s and +/2000°/s, Dual Axis Pitch and Yaw Gyro
STEVAL-MKI042V1*	LPR503AL Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI043V1*	LPR510AL Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI044V1*	LPR530AL Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI045V1*	LPY503AL Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI046V1*	LPY530AL Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI047V1*	LPY550AL Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI048V1*	LY503ALH Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI049V1*	LY510ALH Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI050V1*	LY550ALH Adapter Board designed to be plugged into a standard DIL24 socket
STEVAL-MKI053V1*	MEMS Analog Output Demonstration Board for the LY530ALH, +/-300°/s and +/1200°/s, Dual Axis Pitch and Yaw Gyro
*Available late Q3

Gyroscopes Portfolio [Enlarge]