Your Road Map for ARM® Cortex Solutions

NXP Semiconductors now offers the LPC1700 series of low-power, cost-effective Cortex-M3 32-bit microcontrollers. The series features best-in-class peripheral support such as Ethernet, a USB 2.0 Host/OTG/Device, and CAN 2.0B. The LPC1700 operates at speeds up to 100 MHz and provides up to 512 KB of Flash, up to 64 KB of SRAM, 12-bit A/D, and 10-bit D/A converters, as well as an internal RC oscillator.

It also features a multi-layer AHB bus that allows high-bandwidth peripherals such as Ethernet and USB to run simultaneously, without impacting performance. You can now experience great performance and the world-class services, solutions, and technical expertise of Arrow Electronics.

The LPC1700 series is pin compatible with the popular NXP LPC2300 series of ARM7 microcontrollers, allowing designers to compare the M3 and ARM7 cores in the same socket and choose the microcontroller that is best for their application. LPC176x devices are available in an LQFP100 package, while LPC175x microcontrollers are offered in an LQFP80 package.

The wide array of peripherals and high performance of the LPC1700 mean it is ideal for e-Metering, lighting, industrial networking, alarm systems, white goods, and motor control applications.

Key Features of the LPC1700:

• 100 MHz operation
• True RTC with battery current less than 1 uA
• 4 MHz internal RC oscillator with 1% accuracy over voltage and temperature
• Powerful motor control PWMs and QEI
• 15 serial interfaces with Ethernet, USB, and CAN

Memory:

• Up to 512 KB Flash memory
• Up to 64 KB SRAM

Serial Peripherals:

• 10/100 Ethernet MAC
• USB 2.0 full-speed device/Host/OTG controller with on-chip PHY
• Four UARTs with fractional baud rate generation, RS-485 modem control I/O, and IrDA
• Two CAN 2.0B controllers
• Three SSP/SPI controllers
• Three I2C bus interfaces with one supporting fast mode plus (1 Mbit/s data rates)
• I2S interface for digital audio

Analog Peripherals:

• 12-bit ADC with eight channels and conversion rates up to 1 MHz

Other Peripherals:

• Real-time clock operating at < 1 uA
• Eight-channel general-purpose DMA controller
• Up to 70 general-purpose I/O
• Motor control PWM and quadrature encoder interface to support three-phase motors
• Four 32-bit general-purpose timers/counters
• 4 MHz internal RC oscillator trimmed to 1% accuracy

Your Road Map for ARM® Cortex Solutions [Preview the Cortex-M0]

* This offer is for one kit per customer. Limited time offer only. Kits are limited to current or potential Arrow customers with valid opportunities and are at the discretion of local Arrow representatives.